SHELL MALLEUS GREASE JB 2, MỠ CHỊU TẢI, MỠ CHỊU NHIỆT, GADUS S2 U1000 D2

Shell Gadus S2 U1000 D2

Shell Malleus Mỡ JB

Nhiệm vụ nặng nề mỡ công nghiệp

Chất làm đặc

Shell Malleus mỡ JB là nhiệm vụ nặng nề, nhiệt độ cao, mỡ công nghiệp

cho các ứng dụng đạn trơn tốc độ chậm khó khăn. Chúng được dựa trên một

chất làm đặc vô cơ không xà phòng phân tán trong một cơ sở dầu nhớt rất cao

chứa molypden đisunfua 

Shell Malleus Mỡ JB sẽ bôi trơn và thỏa đáng cho cuộc sống dịch vụ tốt

ở nhiệt độ hoạt động lên đến 200 ° C. Chúng đặc biệt hữu ích khi nặng

mặc đã xảy ra hoặc khó tiếp cận

Typical properties of Shell Gadus S2 U1000 2
Shell Gadus S2 U1000 2	Property
Shell Gadus S2 U1000 2 Product Code Tubes 120 lb kegs 400 lb drums	5067628 5067626 5067627
Shell Gadus S2 U1000 2 Thickener Type	Bentonite Clay
Shell Gadus S2 U1000 2 Appearance	Brown, Smooth
Shell Gadus S2 U1000 2 Viscosity:
@ 40°C, cSt	1000
@ 100°C, cSt	90
Shell Gadus S2 U1000 2 Penetration, dmm
Shell Gadus S2 U1000 2 Worked, 60X	280
Shell Gadus S2 U1000 2 Dropping Point, °F	500+
Shell Gadus S2 U1000 2 Copper Corrosion	1b
Shell Gadus S2 U1000 2 Rust Test, Distilled Water	Pass
Shell Gadus S2 U1000 2 Oil Separation, wt%	< 3
Shell Gadus S2 U1000 2 Water Washout, wt% loss @175°F	< 3
Shell Gadus S2 U1000 2 Water Spray-Off, wt%	< 10
Shell Gadus S2 U1000 2 Timken, OK Load, lbs	40
Shell Gadus S2 U1000 2 Weld Point, kgf	250
Shell Gadus S2 U1000 2 Four-Ball Wear, mm 1 hr, 75°C, 1200 rpm, 40 kgf	0.6

Shell Gadus S2 U1000 2 Product Description

Gadus S2 U1000 2 are multipurpose, non-soap greases. They give excellent lubrication for extended time periods, in wet or dry applications, and over a wide range of temperatures. They are also formulated to provide extreme pressure (EP) characteristics.

Shell Gadus S2 U1000 2 are based on a non-melting bentonite clay thickener system. Due to the inert nature of the clay, these greases are suitable for applications where the lubricant is exposed to contaminants such as water and chemicals found in many industrial applications including chemical plants and paper mills. These greases are not recommended for use in centralized lubrication systems.

Applications

Excellent for applications in the following environments:

1. • industrial grease-lubricated machinery at temperatures up to 250°F (350°F with frequent lubrication)

2. • ball, roller, and sleeve bearings, as well as sliding surfaces and grease lubricated gears

3. • wet and heavily loaded applications

4. • chemical plants and paper mills, where grease is exposed to very wet conditions

5. • mining and process plants, where crushers, screens and kilns are operated at high temperatures

Features/Benefits

1. • non-melting

2. • excellent resistance to water washout

3. • good load carrying capability

4. • good resistance to rust and corrosion

Handling & Safety Information For information on the safe handling and use of this product, refer to its 

Sản phẩm doanh nghiệp: CTY CP TM QUỐC TẾ HOÀNG LONG