GI356.B704634

Mô tả 

Features
– Encoder with solid shaft ø10 mm or ø6 mm
– Max. 6000 pulses per revolution
– Optical sensing method
– Clamping or synchro flange
– Industrial standard
– High rotation speed up to 10000 rpm

Optional

– Stainless steel design GE355
– ATEX-approved, see X 700
– Corrosion protection for offshore applications

Technical data – electrical ratings
Voltage supply 5 VDC ±10 %
4.75…30 VDC
10…30 VDC
Reverse polarity protection Yes (4.75…30 VDC)
Consumption w/o load ≤30 mA (24 VDC)
≤60 mA (5 VDC)
Pulses per revolution 5…6000
Reference signal Zero pulse, width 90°
Sensing method Optical
Output frequency ≤150 kHz
Output signals A 90° B, N + inverted
Output stages Linedriver/RS422
Push-pull short-circuit proof
Interference immunity DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-4
Approval UL approval / E63076
GI355, GI356

Technical data – mechanical design

Size (flange) ø58 mm
Admitted shaft load ≤20 N axial
≤40 N radial
Protection DIN EN 60529 IP 54 (without shaft seal),
IP 65 (with shaft seal)
Operating speed ≤10000 rpm
Starting torque ≤0.015 Nm (+25 °C, IP 54)
≤0.03 Nm (+25 °C, IP 65)
Rotor moment of inertia 14.5 gcm²
Materials Housing: aluminium
Flange: aluminium
Operating temperature -25…+100 °C (5 VDC)
-25…+85 °C (24 VDC)
-40…+85 °C (optional)
Relative humidity 95 % non-condensing
Resistance DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
Connection Connector M23, 12-pin
Cable 1 m
Weight approx. 250 g
GI355
Shaft type ø10 mm solid shaft
Flange Clamping flange
GI356
Shaft type ø6 mm solid shaft
Flange Synchro flange
Solid shaft with clamping or synchro flange
5…6000 pulses per revolution