ENT-R Dải tiếp xúc Bircher,  Bircher Viet Nam

Model:  ENT-R

Part number: 210714

Hãng: Bircher

ĐẶC TÍNH KỸ THUẬT:

Kích thước: 6,8 x 18 mm ± 0,4

EPDM, không dẫn điện, màu đen

Độ cứng: 75 Shore A

Nhiệt độ: -40°C đến 80°C

100 m (210715; ENT-R/100)

50 m (210718; ENT-R/50)

25 m (238947; ENT-R/25)

Hotline: 0933.911.903

Mail: [email protected]

Liên hệ với chúng tôi để có thêm thông tin và giá tốt nhất!

ENT-R 

Part No. 210714 

Contact strip for pressure sensitive safety edges :

The ENT-R contact strip is designed for the use as switching element in pressure sensitive safety edges. It consists of a flexible isolating rubber hose with two flexible conductive rubber bands inside, which are kept at a defined distance in its dormant state. Stranded wires embedded in the conductive rubber bands reduce the length dependent resistance of the conductive rubber. The contact strip is terminated with appropriate end pieces type ENEH-x on both ends and can be pulled into a therefore designed rubber profile. In combination with an approved signal processing unit this assembly can be used as a pressure sensitive safety edge system.  

Contact strip data

Dimensions in mm:  6.8 x 18 mm ±0.4

Material, cover / hose:  EPDM, non-conductive, black

Material, contact band:  EPDM, conductive, black

Material hardness (average value of material mix):  75 Shore A

Material, stranded wire:  LAHN stranded wire

Weight:  95 g/m

Delivery length, coiled (Article-No.; designation): 

100 m (210715; ENT-R/100)

50 m (210718; ENT-R/50)

25 m (238947; ENT-R/25)

Storage temperature:  -40°C to 80°C 

Switching characteristics with end pieces ENEH-x: 

Contact band distance:  2.2 mm ±0.4

Actuating force (Ø 16 mm radial / 10 mm/s):  < 7 N

Actuating cycles:  > 100'000

Max. voltage:  24 V ACDC

Continuous current load at max. voltage:   10 mA

Actuation resistance (typical / max.):  < 200 Ohm / 500 Ohm

Resistance per unit length:  < 2 Ω/m

Protection class:  IP65

Operating temperature:  -25°C to 60°C

Bending radius (minimal), directions A / B / C / D 1.):  800 / 800 / 200 / 200 mm

Conformity

REACH compliance published on www.bircher.com

RoHS compliance published on www.bircher.com

EC type-examination certificate Available for pressure sensitive safety

edges using ENT-R 

Designation key for order:

 Type / Length / End piece left / End piece right

 ENT-R L total [mm]

05 = cable 0.5 m

2 = cable 2 m

x = cable x m

x = cable x m

8K = resistor 8k2

0K = no resistor

Designation example ENT-R/2500/2/8K
​