Desalting valve

Special designs for specific tasks, i.e. low-noise and low-wear level relaxation.

Blow-down valve

The GESTRA security concept, i.e. boiler and spring pressure ensures a safe close and the downstream radial level nozzle for low-wear operation.

In closed loops (emergency power generators, etc.)

ORGS 11-2, PN 6, C 22.8

In open circuits and condensate systems

There is a risk of inleakage by oils, grease, etc.:
OR 52-5, PN 10, G 3/8, GG
OR 52-6, PN 10, G 3/8, 1.4580

There is a risk of inleakage by acids, alkalis, etc.:
Electrode LRG 12-1, PN 10, G 11/4
Transmitter LRT 1-6b
Limit switch URS 2

Heat transfer system type PWT-XPS

http://www.gestra-vietnam.tk/

The GESTRA heat transfer system consisting of a plate heat exchanger XPS in fully welded version in the shell-&-plate design and is equipped with the following components: on the steam side with blocking valve, strainer and electric control valve with safety reset and on the condenser side with pumping condensate drain, check valve, blocking valve.

Measuring and control technology consists of: Safety temperature limiter, safety pressure limiter, temperature sensor, thermostat, thermometer, manometer and safety valve. The system is ready for connection mounted and wired and is delivered on a stable base frame.

Condensate tank type SDL

Cylindrical condensate collecting tanks are designed as standard version for condensate flow rates up to 30 t / h and an operating pressure of 4 bar Max. Higher pressures and pressure sets are available on request. There are containers in lying and standing versions. They are equipped with two adjacent condensate pumps, bimetallic dial thermometer, valve submersible indicator, GESTRA level controller and level electrodes for automatic operation of pumps, check valves, safety valve, anti-vacuum valve, vents, shut-off devices, high pressure centrifugal pumps, manometer and control cabinet to the pump control assembled ready for connection.

Steam converters, pure steam generator

Steam converters produce saturated steam for a secondary system of steam from steam or hot water. Steam generators used mainly for the production of pure steam, where no harmful substances, such as hydrazine, may be included. Applications are e.g. for sterilizing equipment in hospitals, for steam and dry chambers in the food processing, for steam heating systems, for the production of distillates etc. Pure steam systems are available with mechanical, electrical or electro-pneumatic heating steam control.