Electronic Stand-Alone Controller T775

The T775 is an operating control, not a limit or safety control. If used in applications requiring safety or limit
controls, a separate safety or limit control device is required.

• Power: 24, 120, or 240 Vac; 50/60 Hz
• Power Consumption: 8 VA maximum at 60 Hz, 10 VA maximum at 50 Hz
• Operating & Storage Temperature Ambient Rating: -40°F to 125°F (-40°C to 52°C) @ 50 Hz, -40°F to 140°F (-40°C to 60°C) @ 60 Hz
• Relative Humidity: 5% to 95% non-condensing
• Digital Input (DI): 18 Vdc and 3.5 mA (for choosing external contact)
• DigitalDigital Output (DO) Alarm (T775P only):
  Alternating Current (AC):
   — 30 Vac RMS; 1.5 A steady 3 A inrush P.F. 0.45 NC
   — 20 Vac RMS; 100 mA minimum load on NO and NC contacts
  Direct Current (DC): 1 mA at 100 mV DC minimum load
• Relay Contact Output Ratings (N.O. and N.C.):
   —1/2 hp; 9.8 AFL, 58.8 ALR @ 120 Vac
   —1/2 hp; 4.9 AFL, 29.4 ALR @ 240 Vac
   —125 VA pilot duty @ 120/240 Vac
   —10A @ 24 Vac (resistive)
• Modulating Outputs:
   —0-10 Vdc; drive a minimum of 2,000 Ohms
   —2-10 Vdc; drive a minimum of 2,000 Ohms
   —4-20 mA; drive a maximum of 600 Ohms
   —Electronic Series 90; requires 340 Ohm resistor (included) across terminals R and W
   —Floating
• Setpoint Range:  -40°F to 248°F (-40°C to 120°C)
• Time Clock: Two settable time periods per day are standard on all models.

Sản phẩm doanh nghiệp: MINH GIAO TECHNICAL AND TRADING CO., LTD