HiC2065 - Voltage Repeater - Đại Lý Pepperl Fuchs

HiC2065 - Voltage Repeater -  Đại Lý Pepperl Fuchs 

Nhà sản xuất:  Pepperl Fuchs

Nhà cung cấp: Newskyvn

Model : HiC2065

Tên sản phẩm: Voltage Repeater

Liên hệ để được tư vấn hỗ trợ Mr.Thanh:

Email:  quangthanh@newskyvn.com

Zalo: 0965.130.856

Đại lý Pepperl Fuchs Việt Nam

THÔNG SỐ KỸ THUẬT CỦA HiC2065

General specifications
Signal type		Analog input
Supply
Connection		SL1: 1a, 1b(-); 2a, 2b(+)
Rated voltage		20 ... 30 V DC bus powered via Termination Board
Ripple		within the supply tolerance
Rated current		≤ 22 mA
Power dissipation/power consumption		0.7 W max.
Lockout voltage		> 11 V DC
Input
Connection side		field side
Connection		SL2: 5a(+), 5b(-)
Input resistance		≥ 16 MΩ
Transmission range		0 ... ± 50 mV
Offset voltage/current		≤ 5 µV / ≤ 5 nA
Output
Connection side		control side
Connection		SL1: 8a(+), 7a(-)
Voltage		0 ... ± 50 mV
Load		Accuracy figures for infinite load impedance. Additional 0.03 % of span for a load resistance of 10 kΩ
Output resistance		max. 3 Ω
Line fault detection		input: ± 100 mV output: +200 mV, -115 mV
Fault indication output
Connection		SL1: 6b
Output type		open collector transistor (internal fault bus)
Fault voltage		< Vcc/2 (when connected to Vcc via 10 kΩ pull up resistor)
Transfer characteristics
Deviation
	After calibration	at 20 °C (68 °F): ± 3 µV up to ± 10mV/± 0.05 % of the span up to +50 mV/± 0.05 % of the span up to -50 mV
	Influence of ambient temperature	± 1 µV/K (typical ± 0.25 µV/K)
Absolute		< 0.25 K at 30 V voltage supply
Bandwidth		DC to > 350 Hz (-3 dB)
Settling time		< 2 ms
Rise time/fall time		≤ 1 ms
Galvanic isolation
Output/power supply		functional insulation, rated insulation voltage 50 V AC
Indicators/settings
Display elements		LEDs
Control elements		DIP-switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2006 For further information see system description.
Degree of protection		IEC 60529:2001
Protection against electrical shock		UL 61010-1
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 100 g
Dimensions		12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch)
Mounting		on Termination Board
Coding		pin 2, 3 and 4 trimmed For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate		BASEEFA 10 ATEX 0031X
	Marking	II (1)GD, I (M1), [Ex ia] IIC, [Ex iaD], [Ex ia] I (-20 °C ≤ Tamb ≤ 60 °C) [circuit(s) in zone 0/1/2]
	Voltage	5.5 V DC
	Current	2.4 mA
	Power	3.3 mW
Supply
	Maximum safe voltage	253 V (Attention! The rated voltage can be lower.)
Certificate		BASEEFA 10 ATEX 0032X
	Marking	II 3G Ex nA II T4
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
UL approval
	Control drawing	116-0317 (cULus)
IECEx approval		IECEx BAS 10.0012X IECEx BAS 10.0013X
	Approved for	[Zone 0] [Ex ia] IIC, [Ex iaD], [Ex ia] I Ex nA II T4
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

Sản phẩm doanh nghiệp: Công ty TNHH TM DV SX Tân Thiên