Aerosol Can Testing | Máy kiểm tra vỏ lon | Canneed Vietnam | Can need Vietnam | Pitesco Vietnam

The Canneed “ZM-10 Digital Body Blank Gauge” is made for the quality control of can body blanks. It is a precision gauge for body blank measurement/angle measurement.

The Canneed "WWP-100 Welding Seam Ball Press Tester" is used to test the welding seam quality, including the welding seam strength and continuity of 3-piece cans. 
Testing Method: place the empty cans to the clamp, align the welding seam with the ball, and then tightly press the can. The cylinder pushes the ball to slide along the welding seam. Next, take the can out to check if there are any breaches.

The CanNeed Seam Sight® Full Automatic Seam Monitor has adopted the advanced optical system and Golden Lens® video capture device, which interference-free of external light source and ensured the high image definition and the measurement accuracy. The Seam Sight® system is equipped with the new seam measuring software Seam Sight®. 
The CanNeed Seam Sight® -A system can automatically collect the data from STG-200-D Seam Thickness Gauge and CSG-200 Countersink Gauge. The actual seam thickness and countersink can be generated reports together with other data. To optimize the measurement process.
Measurement Process
Before cutting the sample can, use STG-200-D Seam Thickness Gauge to measure the seam thickness rate; meanwhile, use CSG-200 Countersink Gauge to measure the countersink rate; then the Seam Sight -A will collect the both data automatically.
After that, the sample can should be cut with CSS-1000 Anti-noise Seam Saw or CSS-2000 Seam Saw and placed at the camera position of the monitor. Then, the seaming images will be displayed on the screen. The auto measurement will be finished within 1 second if you press the “Confirmation” button. All images and measurement data will be saved in the system data base.

The Canneed ACH-100 Aerosol Curl Height Gauge is used for measuring 
the contact height of the curl 1" aperture of aerosol cans. 
ACH-100 is the Industry Standard.

The gauge is first calibrated by setting the calibration ring on the gauge. In this case the dial has to indicate the value of 4.25 mm.
The measurement on the can is then inserting the gauge up to the shank into the can and then slowly releasing the button.

The RPG-100 is able to scan profiles of seaming Rolls and Chucks (or other tooling - including carbide and ceramic tools) easily and quickly. The system can be used for acceptance testing for new seaming rolls or chucks, for quality assurance purposes and for stress analysis. Monitor tooling wear to replace rolls and chucks only when they need to be replaced

The CanNeed "CND-TRK-300 Oven Temperature Tracker"is a professional oven temperature curve inspection system for the coating industry, it is including the data logger, heat insulation case, software (Chinese / English) and thermocouples."CND-TRK-300 Oven Temperature Tracker" is use to pass through the oven with the solidifying products, and record down the real temperature during the process.

FWG-100-d, FWG-200-d, FWG-300-d Flange width gauge
Canneed FWG-d Flange width gauge is designed to measure the flange width of open ended cans.
The spring loaded can guides automatically position the can for fast, accurate, 
and repeatable measurements. Constructed of machined for corrosion resistance and long life.  
The base plate is stainless steel to extend the wear life of the surface. 
With the Mitutoyo 0.01mm Resolution Digital Indicator. 
The gauges may be connected to a computer via a multiplexer.

Measures 6 characteristics in 1 compact Gauge
AMG-300 Aerosol Measuring Gauge is a Convenient Gauge for Aerosol Cans, it can Measures 6 characteristics in 1 compact Gauge. measures the following characteristics:
1) Can Height over all (E)
2) Can Height over the seams (D)
3) Can height between the seams (F)
4) Top Outside Diameter (K), 
5) Top seam Outside Diameter 
6) Bottom seam Outside Diameter

The "DHG-300 Digital Can Height Gauge" can be used to measure the height of beverage, food, and aerosol cans. The gauges can be connected to a computer or SPC system via the adapter and cable.