BÀN TỪ KẸP NAM CHÂM ĐIỆN VĨNH CỮU

BÀN TỪ KẸP NAM CHÂM ĐIỆN VĨNH CỮU
ELECTRO-PERMANENT MAGNETIC CHUCK
Maker: EARTH - CHAIN ( Made in Taiwan )
Model: EEPM Series
 Chú ý: Quý khách hàng hãy lựa chọn Model thích hợp với nhu cầu sửa dụng của Quý khách theo Catalogue bên dưới và liên hệ với Công ty chúng tôi để được chào giá tốt nhất, Công ty chúng tôi rất hân hạnh được phục vụ Quý khách.

۩  Working Example:

۩ Features:

1. Super power magnetic force 1000kgf/100cm². (4 Poles)
2. 3~10 seconds control for power ON & OFF. No electric power supply required to keep the magnetic chuck ON. Safety in case of power failure.
3. No power supply to keep the magnetic chuck ON, it could be used for long time and never get temperatures to affect the accuracy of workpieces.
4. Can do 5 sides machining, un-obstructed movement of cutters during machining. One cycle to finish a workpiece, helps in achieving best machining accuracy and increases efficiency a lot..
5. Easy and convenient to clamp a workpiece, shortens clamping time.

۩ Applications:

1. Most suitable for machining on medium & small or even rough workpieces.
2. Suitable for drilling and finishing machining on small workpieces.
3. Minimum size of workpiece required as 4 alternate magnetic square poles and above contacts is necessary for optimum clamping.
4. Minimum thickness of workpiece required:10mm.
5. More functions for cooperate with Induction Block and Spring Block.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

KHỐI TỪ KẸP NAM CHÂM VĨNH CỮU
PERMANENT MAGNETIC CLAMPING BLOCK
Maker: EARTH - CHAIN ( Made in Taiwan )
Model: ECB Series
 Chú ý: Quý khách hàng hãy lựa chọn Model thích hợp với nhu cầu sửa dụng của Quý khách theo Catalogue bên dưới và liên hệ với Công ty chúng tôi để được chào giá tốt nhất, Công ty chúng tôi rất hân hạnh được phục vụ Quý khách.

Suitable for medium & large workpiece. (Can do 5 sides machining)

۩  Working Example:

۩ Features:

1. The all new model Magnetic Clamping Block ECB Series are a new sense of clamping way for metal working on CNC Machining Center and Milling Machine in quick clamp workpieces.
2. Free to set up position, numbers and distance of Magnetic Clamping Block according to the size of workpiece.
3. The ECB Series including changeable Induction Soft Block. It can be revised the surface to be 100% accuracy on the machine for clamp workpieces. Can be also cutting, drilling, tapping and slotting directly to the Induction Soft Block during machining workpiece. Multi-function of Induction Soft Block, the user can make it by themselves according to workpiece required.
4. Two machining circle for finish workpiece machining, increase a lot of machining efficiency and achieve accuracy required.

۩ Applications:

1. Most suitable for medium and large size of workpiece machining on milling machine and CNC machining center.
2. Minimum size of workpiece required as bigger than an area of two Magnetic Clamping Blocks.
3. The Magnetic Clamping Blocks are not suitable for small workpiece clamping.

۩ Note:

1. Please always make sure the Switch was in ON position before
2. The Magnetic Clamping Blocks are not suitable for non-magnetic
3. The principle of Magnetic Clamping Blocks is magnetism of N. S. poles, so please always put the workpiece between N. S. poles. (The middle of top clamping range)

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Liên Hệ : Công Ty TNHH TM DV XNK MINH NGUYÊN
Địa chỉ: 45/11A Quang Trung , P.10 , Q. Gò Vấp - Tp. HCM
Tel : 848 - 39212 668      Fax : 848 - 39212588
Di động : 0902 075 850  - 0933 001511( Mr. Điền )
Email : land_tran@ ovi.com hoặc [email protected]
web: www.minhnguyenvn.com

Sản phẩm doanh nghiệp: CÔNG TY TNHH TM DV XNK MINH NGUYÊN.