Đồng hồ chênh áp Series 2000-60 PA

CÔNG TY CỔ PHẦN KỸ THUẬT VIỆT PHÁP

Chuyên cung cấp đồng hồ đo, thiết bị đo, cảm biến của hãng Dwyer – Mỹ:

Đồng hồ chênh áp

Series 2000 - 60 Pa

Specification:

• Wetted Materials: Consult factory.
• Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
• Accuracy: ±2% of full scale (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
• Pressure Limits: -20" Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
• Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
• Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).
• Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
• Process Connections: 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
• Weight: 1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
• Standard Accessories: Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for 3 adapters in MP & HP gage accessories.)

“Đáp ứng mọi yêu cầu của Quý khách và mang đến sự hài lòng tốt nhất”.

Thanks and Best Regards

Quoc Hiep (Mr) - Sales Representative

Viet Phat Technologies Corporation

818/56/9 Nguyen Kiem Street, Ward 3, Go Vap District, Ho Chi Minh City

Phone : 0943.666.038

Tel : 08 – 35885256                           Fax : 08 - 39890210

Email : hiep@viphaco.vn                     Skype : vietphatcorp 

Website : www.viphaco.vn                  Yahoo : vietphatcorp