Biến tần INVT đa năng CHV100 Close Loop Vector Control

Đặc điểm:

Product Description:

 ● Input & Output
  - Input VoltageRange:      1140/690/380/220V±15%
  - Input FrequencyRange:   47~63Hz
  - Output VoltageRange:     0~rated input voltage
  - Output FrequencyRange:  0~600Hz
 ● Main Control Function
  - Control Mode: Sensorless vector control (SVC), Vector control with PG (VC), V/F control.
  - Overload Capacity: 60s with 150% of rated current, 10s with 180% of rated current.
  - Starting Torque: 150% of rated torque at 0.5Hz (SVC);
    180% of rated torque at 0Hz(VC).  
  - Speed Adjusting Range: 1:100 (SVC); 1:1000 (VC)
  - Speed Accuracy: ± 0.5% of maximum speed (SVC); ± 0.02% of maximum speed (VC)
  - Carrier Frequency: 1.0kHz~16.0kHz.
  - Frequency reference source: keypad, analog input, HDI, serial communication, multi-step speed, simple PLC and PID. The combination of multi- modes and the switch between different modes can be realized.
  - Torque Control Function: Provide multiple torque setting source.
  - PID Control Function
  - Simple PLC or Multi-steps Speed Control: 16 steps speed can be set.
  - Traverse Control Function
  - Length and Time Control
  - Non-Stop Function while instantaneous power failure
  - Speed Trace Function: Smoothly start the running motor.
  - QUICK/JOG Function: User defined shortcut key can be realized.
  - Automatic Voltage Regulation (AVR): Automatically keep the output voltage stable when input voltage fluctuating
  - Up to 29 fault protections: Protect from over current, over voltage, under voltage, over temperature, phase failure, over load etc.
 ● I/O Features
  - Programmable Digital Input: Provide 5 terminals which can accept ON-OFF inputs, and 1 terminal which can accept high speed pulse input (HDI1). 4 inputs can be extended by I/O extension card.
  - Programmable Analog Input: AI1 can accept input of 0 ~10V, AI2 can accept input of 0~10V or 0~20mA. AI3 (-10V~10V) and AI4 (0~10V or 0~20mA) can be extended by I/O extension card.
  - Programmable Open Collector Output: Provide 1 output terminal. 1 output (open collector output or high speed pulse output) can be extended by I/O extension card.
  - Relay Output: Provide 2 output terminals. 1 output can be extended by I/O extension card.
  - Analog Output: Provide 1 output terminal, whose output scope can be 0/4~20 mA or 0~10 V, as chosen. 1 AO (0/4~20mA or 0/2~10V) can be extended by I/O card.

Ứng dụng: Printing machine, dying machine, paper machine, wind and unwind, high accuracy machine tool, cutting machine. steel rolling, metal, wire machine, drawbench, position control, zero speed servo control.

Sản phẩm doanh nghiệp: Công ty TNHH TM & DVKT Tự động hóa Hưng Thịnh