KỀM BẤM COS BURNDY

TYPE MD7
POSI-PRESS
HYTOOL™

HAND-OPERATED TOOL

The MD7 POSI-PRESS HYTOOL™ is a composite polymer handle installation tool

that requires no adjustment for the life of the tool. This assures users of the MD7 tool, that
all connections installed with the MD7 POSI-PRESS HYTOOL™ are consistent and
reliable over the life of the tool. This new technology tool provides a visual wear indicator

that makes verification of the tool's condition easy to determine. Once the tool has worn
beyond its useful life, it can be returned to BURNDY's ToolRepair Center for re-fitting at
a fraction of the price of a new tool.

Installs full range of connectors, (taps, splices, terminals): #14 Awg through 4/0 Awg.

Applications: Full-Tension and Non-Tension.

The MD7 series of tooling has a five (5) year warranty and is designed to provide over

99,000 reliable crimps installing both full-tension and non-tension connectors.

The MD7-8 POSI-PRESS HYTOOL™ installs almost all of the line, pole, and house connections

in the Burndy Compression Connector Program with only one (1) extra die set (W-BG).

The MD7-8 tool has two (2) permanent die grooves, "O" and D3" for distribution tap connectors.

For other tool versions, see the MD7 Tool Variations sections below. The "D3" groove also serves

as a seat for die inserts to install splices, taps, and terminal connectors. The die inserts snap into
the "D3" groove easily with only one hand, and lock securely in the tool with the spring
loaded, positive lock, die retainer buttons. Handles have been tested at 100 Kv per foot
for five (5) minutes.

FOR USE ON

• Copper, Aluminum, ACSR, Copperweld, Alumoweld, Steel, 6201 5005.
Compressed and compact conductors

• Copper Taps: #10 sol. - 2/0 str.

• Aluminum, ACSR Taps: #14 sol. - 4/0 ACSR
• Stirrups: #6 ACSR - 4/0 ACSR
• Overhead Full Tension Deadend, Full Tension Splices, Non Tension Splices,

and Terminals Conductor Range: #10 str. - 4/0 ACSR
• Code conductor connectors: #6 - 4/0 str. Copper and Aluminum
 

MD7 Tool Variations

MD7-8   MD7 with permanent "O" and "D3"

              grooves.  Installs almost all of the line, pole, and house connections

              in the Burndy Compression Connector Program with only one

              (1) extra die set (W-BG).

MD7-6   Snub-Nose variation of MD7 has a permanent "D3 " groove jaw.

              Accepts the full-line of BURNDY® "W" and "X" die inserts.

              Recommended for use where space for tool jaw is limited.

MD7       Standard MD7 with permanent "BG" (5/8ꉟ) and "D3 " grooves.

              Installs Cablelok Crimpit and HYCRIMP™ Tap connectors with

              one (1) additional die insert (W-O). All other tool features and

Weight: 7.44 lb

TYPE MD7-8
POSI-PRESS
HYTOOL™

HAND-OPERATED TOOL

The MD7-8 POSI-PRESS HYTOOL™ is a composite polymer handle installation tool

that requires no adjustment for the life of the tool. This assures users of the MD7-8 tool, that
all connections installed with the MD7-8 POSI-PRESS HYTOOL™ are consistent and
reliable over the life of the tool. This new technology tool provides a visual wear indicator

that makes verification of the tool's condition easy to determine. Once the tool has worn
beyond its useful life, it can be returned to BURNDY's ToolRepair Center for re-fitting at
a fraction of the price of a new tool.

Installs full range of connectors, (taps, splices, terminals): #14 Awg through 4/0 Awg.

Applications: Full-Tension and Non-Tension.

The MD7 series of tooling has a five (5) year warranty and is designed to provide over

99,000 reliable crimps installing both full-tension and non-tension connectors.

The MD7-8 POSI-PRESS HYTOOL™ installs almost all of the line, pole, and house connections

in the Burndy Compression Connector Program with only one (1) extra die set (W-BG).

The MD7-8 tool has two (2) permanent die grooves, "O" and D3" for distribution tap connectors.

For other tool versions, see the MD7 Tool Variations sections below. The "D3" groove also serves

as a seat for die inserts to install splices, taps, and terminal connectors. The die inserts snap into
the "D3" groove easily with only one hand, and lock securely in the tool with the spring
loaded, positive lock, die retainer buttons. Handles have been tested at 100 Kv per foot
for five (5) minutes.

FOR USE ON

• Copper, Aluminum, ACSR, Copperweld, Alumoweld, Steel, 6201 5005.

Compressed and compact conductors

• Copper Taps: #10 sol. - 2/0 str.

• Aluminum, ACSR Taps: #14 sol. - 4/0 ACSR
• Stirrups: #6 ACSR - 4/0 ACSR
• Overhead Full Tension Deadend, Full Tension Splices, Non Tension Splices,

and Terminals Conductor Range: #10 str. - 4/0 ACSR
• Code conductor connectors: #6 - 4/0 str. Copper and Aluminum
 

MD7 Tool Variations

MD7-8   MD7 with permanent "O" and "D3"

              grooves.  Installs almost all of the line, pole, and house connections

              in the Burndy Compression Connector Program with only one

              (1) extra die set (W-BG).

MD7-6   Snub-Nose variation of MD7 has a permanent "D3 " groove jaw.

              Accepts the full-line of BURNDY® "W" and "X" die inserts.

              Recommended for use where space for tool jaw is limited.

MD7       Standard MD7 with permanent "BG" (5/8ꉟ) and "D3 " grooves.

              Installs Cablelok Crimpit and HYCRIMP™ Tap connectors with

              one (1) additional die insert (W-O). All other tool features and

Weight: 7.44 lb