THIẾT BỊ ĐỊA VẬT LÝ Phoenix Geophysics (Canada)

Phoenix Geophysics được thành lập vào năm 1975 tại Canada. Hiện nay, Phoenix Geophysics là nhà sản xuất các hệ thống, thiết bị địa vật lý theo công nghệ Magnetotelluric (MT) và Induced Polarization (IP) hàng đầu trên thế giới. Các hệ thống thiết bị của Phoenix được sử dụng rộng rãi trên hơn 80 nước trên toàn thế giới nhằm phục vụ cho công tác dò tìm và khảo sát khoáng sản, mạch nước ngầm...

T-3 Multifunction Current Source for
Geophysical Techniques

• Low cost
• Lightweight, highly portable
• Operates at –20°C to +50°C
• No cable links required between
transmitter and System 2000.net
receivers (V8, RXU)
• Wide range of power sources:
50Hz or 60Hz motor generators or
12V batteries
• 32Hz to 16s (Time Domain);
~10kHz to 8s (Frequency Domain)

CSAMT :  Controlled Source Audio MT
IP :  Induced Polarization: Frequency
and Time Domain, Phase andSpectral IP
TDEM,
FDEM
             All common Time and Frequency
             Domain Electromagnetics
             functions
Resistivity :  All common Resistivity functions
                        (Dipole, Schlumberger, or Wenner
                         soundings)

T-3 Multifunction Current Source

The T-3 is a lightweight,
versatile: multipurpose signal source for usein a variety of geophysicaltechniques. Weighing only 12kg, it is easily transportable on a backpack over virtually any terrain. The T-3 can drive either inductive loads (loops) used in TDEM or FDEM techniques, or grounded dipoles used in IP, Resistivity, and CSAMT techniques.

Proven Technology
Phoenix design experience extends over 40 years, and the T-3 builds on this record. T-3 transmitters have been used in countless field surveys under every climatic condition worldwide.
Wide Range of Power
SourcesThe T-3 can be powered by one or more external 12V batteries or by Phoenix’s selectable-voltage BP-24/72 battery pack. Alternatively, the power source can be a standard geophysical motor generator, or any of a number of commercially available 50Hz or 60Hz motor generators. This flexibility means that the power source (and parts and service) can be obtained almost anywhere in the world.
System Integration
The T-3 can be controlled by a
System 2000.net RXU-TM
transmitter monitor, with or without
radio networking to a V8 receiver.

Specifications:

+ Dimensions : 20 x 40 x 55cm
+ Weight  : 12kg
+Displays : Output current (LCD); line voltage or output voltage (switchable meter)
+AC Input : 50 or 60Hz, 200–240V, ≤3.5kVA
+DC Input : 12–72V transmission and 12V control
+Output Voltage : 300V, 600V, or 1100V nominal (1000V maximum in regulated markets)
+Output Power : Maximum 2.2kVA
+Output Current : 50mA to 9A
+Current Regulation : Output ± 0.2% for ±10% variation in input voltage or electrode impedance
+Internal Timing : 32Hz to 16s (Time Domain); ~10kHz to 8s (Frequency Domain)
+External Timing : DC to ~10kHz, via cable link to suitable receiver or clock source such as RXU-TM, RXUTMR,
or MTU-TXC. (RXU-TMR includes radio networking with controlling V8-R multifunction
receiver.) All Phoenix receivers and clock sources are GPS synchronized.
+Protection : Over-current (10.2A max.)
Under-current (~0.05A min.)
Over-voltage (100% of full scale)
Over-temperature
+ Environmental : Operating: –20°C to +50°C

Mọi thông tin xin vui lòng liên hệ:

Trung tâm Phân phối Thiết bị nhập khẩu – Công ty CP Tin học và Tư vấn Xây Dựng

Trụ sở chính:                37 Lê Đại Hành – Hai Bà Trưng – Hà Nội

Chi Nhánh :                  63 Trần Khánh Dư, Q. 1, TP Hồ Chí Minh

ĐT:                                 08. 38484 550

Fax:                                08. 38484 549

Email:                           [email protected]

Phụ trách kinh doanh:   Mr. Minh Vương/ 0917 197 153

Sản phẩm doanh nghiệp: Công Ty CP tin học và Tư Vấn Xây Dựng CIC