Solenoid Driver HiD2872 - Đại lý Pepperl fuchs - 0965.130.856

Nhà sản xuất:  Pepperl Fuchs

Nhà cung cấp: Newskyvn

Model : HiD2872

Tên sản phẩm: Solenoid Driver

Liên hệ để được tư vấn hỗ trợ Mr.Thanh:

Email:  quangthanh@newskyvn.com

Zalo: 0965.130.856

Đại lý Pepperl Fuchs Việt Nam

THÔNG SỐ KỸ THUẬT CỦA HiD2872 ĐẠI LÝ PEPPERL FUCHS 

General specifications
Signal type		Digital Output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Supply
Connection		SL1: 1a(-), 1b(-); 2a(+), 2b(+)
Rated voltage		20.4 ... 30 V DC loop powered 20.4 ... 30 V DC bus powered via Termination Board
Input current		62 mA at 24 V, 300 Ω load (per channel)
Power dissipation		1 W at 24 V, 300 Ω load (per channel)
Input
Connection side		control side
Connection		SL1: 8a(+), 7a(-); 10a(+), 9a(-) bus powered SL1: 8b(+), 7b(-); 9b(+), 10b(-) loop powered
Control input		external switch (dry contact or open collector) non isolated or logic signal input fully floating
Signal level		1-signal: 15...30 V DC (current limited at 3 mA) or contact close (internal 10 kΩ pull-up) 0-signal: 0...5 V DC or contact open
Power dissipation		1 W at 24 V, 300 Ω load (per channel) for loop powered
Inrush current		0.2 A , 15 ms loop powered
Output
Connection side		field side
Connection		SL2: 5a(+), 5b(-), 7a(+); 1a(+), 1b(-), 3b(+)
Internal resistor		approx. 240 Ω
Current		≤ 40 mA
Voltage		≥ 12 V
Current limit		55 mA
Open loop voltage		approx. 22.5 V
Load		nominal 0.1 ... 5 kΩ
Switching frequency		- bus powered: filter OFF: max. 150 Hz, filter ON: max. 15 Hz - loop powered: max. 10 Hz
Energized/De-energized delay		- bus powered: filter OFF: 1 ms, filter ON: 10 ms - loop powered: switch-on 50 ms, switch-off 6 ms (300 Ω load)
Fault indication output
Connection		SL1: 6b
Output type		open collector transistor (internal fault bus)
Fault current		4 mA pulsing (20 ms ON, 200 ms OFF)
Fault level		lead short-circuit detection at < 25 Ω lead breakage detection at > 100 kΩ typical
Galvanic isolation
Output/Output		safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V
Output/power supply, inputs, and collective error		safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V
Indicators/settings
Display elements		LEDs
Control elements		DIP-switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2006 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Relative humidity		5 ... 90 %, non-condensing up to 35 °C (95 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 140 g
Dimensions		18 x 106 x 128 mm (0.7 x 4.2 x 5 inch)
Mounting		on Termination Board
Coding		pin 1 and 4 trimmed For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate		CESI 10 ATEX 036
	Marking	II (1)G [Ex ia Ga] IIC  II (1)D [Ex ia Da] IIIC  I (M1) [Ex ia Ma] I
	Output	Ex ia Ga, Ex ia Da, Ex ia Ma
	Voltage	26 V
	Current	110 mA
	Power	715 mW
Supply
	Maximum safe voltage	253 V AC (Attention! Um is no rated voltage.)
Certificate		PF 10 CERT 1729 X
	Marking	II 3G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
CSA approval
	Control drawing	366-005CS-12B (cCSAus)
IECEx approval
	IECEx certificate	IECEx CES 10.0013
	IECEx marking	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

Sản phẩm doanh nghiệp: Công ty TNHH TM DV SX Tân Thiên