HOLIP-B

Item

Specification

Power supply

Supply voltage

Single/Three phase: 200-240 V ±10% ;

Three phase: 380-480 V ±10%;

Frequency

48-62Hz;

Max. imbalance

3%;

Power output

Output voltage

Three phase  0-100% of supply voltage;

Output frequency

V/F : 0-400Hz , VVC+: 0-200Hz;

Main control functions

Control model

V/F, VVC+;

Start torque

0.5Hz   150%;

Overload capacity

150% rated output current (60s), 

180% rated output current(1s);

PWM switch frequency

2K-16KHz;

Reference resolution

Digital: 0.001Hz ; Analog:  0.5‰ of the max. output frequency ;

Speed open-loop control accuracy

30 - 4000 rpm: error±8 rpm;

Speed closed-loop control accuracy

0 - 6000 rpm: error±0.15 rpm;

Control command source

LCP , digital terminal, local bus;

Frequency setting source

LCP , Analog, impulse, local bus;

Ramp time

4 group of ramp time 0.05-3600.00s;

Basic Functions

AMA Function; Motor Pre-excitation; Slip Compensation; Torque compensation; Automatic Voltage Regulation;  V/F Control, DC Brake; AC brake; Speed Limit; Current Limit; Flying Start; Automatic Reset and Restart; Counter; Timer; Internal PI Controller.

Application Functions

Speed Open-loop Control; Speed Closed-loop Control; Process Closed-loop Control; Wobble Function; Cascade; Winder; Jogging ; Multi-speed Internal Control; Multi-speed External Control; SLC（including Order Control、Parallel Control）; Mechanical Braking; UP/DOWN ; Catch up /Slow down; Relative proportional setting etc.

Protection

Functions

Missing Motor Phase Protection; Low-voltage Protection; Over-voltage Protection; Over-current Protection; Output Phase Loss Protection; Output Short Circuit Protection; Output Grounding Fault Protection; Motor Thermal Protection; Live Zero Timeout Function; AMA Fails; CPU Fault; EEPROM Faults; Button freeze; Duplicate Fails; LCP Invalid; LCP Incompatible; Parameter Read-only; Value Out of Range; Unable to execute during running; Password Error etc.

 Control Terminals

Digital input

Number

6 digital inputs, up to 39 different feature selections

Scanning time

1ms；

Analog input

Number of input

2 analog inputs（VI、AI），both can receive voltage or current signals.

Input accuracy

Max.error: 0.5% of full scale

Resolution

11bit; 

Scanning time

1ms;

Pulse input

Input number

1 pulse input（DI4）, pulse range:20HZ-50HZ;

Input accuracy

Max.error:0.5% of full scale;

Resolution

11bit;

Scanning time

16ms;

Digital output

Output number

2 digital outputs（DO1、DO2）, up to 67 different feature selections;

Relay output

2 relay outputs（KA-KB、FA-FB-FC）, up to 67 different feature selections;

Scanning time

1ms;

Analog output

Output number

2 analog outputs（VO、AO）, VO can output voltage signals as well as current signals, AO can only output current signals, up to 11 different feature selections;

Output accuracy

Max. error:  4‰ of full scale;

Resolution

11bit  ;           

Scanning time

16ms;

Pulse output

Output number

1 impulse output（DO1）, up to 12 status display;

Output accuracy

Max.error: 0.5% of full scale;

Resolution

11bit;

Scanning time

16ms;

Power supply

VDD

24VDC power supply;

+10V

10VDC power supply;

RS485 serial communication

Terminal number

1, RS+（TX+,RX+）, RS- (TX-, RX-);

Ground for RS485

COM;

Display

8 segments, 5 digital displays

Display frequency, warnings, status and so on;

Indicator

Light FWD、REV、HZ、A、R/MIN display various status of the inverter;

Monitoring

Frequency setting, output frequency, feedback value, output current, DC link voltage, output voltage, output power, input terminals state, output terminals state,  analogue input , analogue output, 1-10 fault records and accumulated working time etc.;

Accessory

PG card

PG01

Support open collector output、push-pull output and voltage output encoder;

PG02

Support line driver output encoder;

Remote mounting kit for LCP

Available when the control panel for external use;

Copy card

Copy  parameters  from one inverter to another ;

Environment

Enclosure

IP20;

Ambient temperature

-10℃-40℃;

Humidity

5%-85%（95% without condensation）;

Vibration test

1.14g;

Max. altitude above sea level

1000m，derating use when more than 1000 meters;

Motor cable length

Shield cable: 5 meters, unshield cable: 50 metres;