Crosby G-2140 Alloy Bolt Anchor Bow Lifting Shackles with Nut & Split Pin - Range from 30000kg to 400000kg

Crosby Alloy Bolt Type Anchor Shackles.

 

Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. These Shackles are quenched and tempered.

• Alloy bows, Alloy bolts.
• Forged Alloy Steel 30 thru 175 metric tons. Cast Alloy Steel 200 thru 400 metric tons.
• Working Load Limit is permanently shown on every shackle.
• All sizes are individually proof tested to 2.0 times the Working Load Limit.
• Pins are galvanized and painted red.
• Certification must be requested at time of order.
• Shackles are quenched and tempered and can meet DNV impact requirements of 42 joules at -20 C.
• Shackles 200 metric tons and larger are provided as follows.
  • Serialized Pin and Bow
  • Material Certification (Chemical)
  • Magnetic Particle Inspected
• G-2140 meets the performance requirements of Federal Specification RR-C-271D, Type IVA, Grade B, Class 3, except for those provisions required of the contractor.

Metric Specifications

Nominal Shackle Size (in.)	Working Load Limit (t)*	Stock No.		Weight Each (kg)	Dimensions (mm)												Tolerance + / -
		G-2140	S-2140		Dimensional Drawing	A	B	C	D	E	F	G	H	J	K	L	A	E
1-1/2	30	1021110	1021129	8.52		60.5	91.9	41.1	41.4	146	35.3	175	196	254	98.6	38.9	3.3	6.4
1-3/4	40	1021138	1021147	15.4		73.2	106	57.2	50.8	178	44.5	224	237	313	127	46.7	3.3	6.4
2	55	1021156	1021165	23.6		82.6	122	61.0	57.2	197	50.8	258	264	347	146	52.8	3.3	6.4
2-1/2	85	1021174	1021183	43.5		105	148	79.2	69.9	267	66.5	324	345	455	184	68.8	6.4	6.4
3	120	1021192	–	81		127	165	92.2	82.6	330	76.2	371	384	546	200	79.2	6.4	6.4
3-1/2	† 150	1021218	–	120		133	203	111	95.3	372	95.3	432	448	632	229	91.9	6.4	6.4
4	† 175	1021236	–	153		140	229	116	108	368	102	457	517	652	254	102	6.4	6.4
4-3/4**	† 200	1021422	–	204		184	267	152	121	397	95.3	533	539	743	279	114	6.4	6.4
5**	† 250	1021442	–	272		216	305	165	127	508	98.6	622	576	889	330	114	6.4	6.4
6**	† 300	1021460	–	352		213	305	171	152	495	129	635	637	895	330	127	6.4	6.4
7**	† 400	1021478	–	500		210	356	184	178	572	165	660	728	1022	330	152	6.4	6.4

Imperial Specifications

Nominal Shackle Size (in.)	Working Load Limit (t)*	Stock No.		Weight Each (lbs.)	Dimensions (in.)																Tolerance +/-
		G-2140	S-2140		Dimensional Drawing	A	B		C	D	E		F	G		H		J	K	L	A	E
1-1/2	30	1021110	1021129	18.8		2.38	3.62		1.62	1.63	5.75		1.39	6.88		7.73		10.00	3.88	1.53	.13	.25
1-3/4	40	1021138	1021147	33.9		2.88	4.19		2.25	2.00	7.00		1.75	8.81		9.33		12.34	5.00	1.84	.13	.25
2	55	1021156	1021165	52.0		3.25	4.81		2.40	2.25	7.75		2.00	10.16		10.41		13.68	5.75	2.08	.13	.25
2-1/2	85	1021174	1021183	96.0		4.12	5.81		3.12	2.75	10.50		2.62	12.75		13.58		17.90	7.25	2.71	.25	.25
3	120	1021192	-	178.0		5.00	6.50		3.63	3.25	13.00		3.00	14.62		15.13		21.50	7.88	3.12	.25	.25
3-1/2	† 150	1021218	-	265.0		5.25	8.00		4.38	3.75	14.63		3.75	17.02		17.62		24.88	9.00	3.62	.25	.25
4	† 175	1021236	-	338.0		5.50	9.00		4.56	4.25	14.50		4.00	18.00		20.37		25.68	10.00	4.00	.25	.25
4-3/4**	† 200	1021422	-	450.0		7.25	10.50		6.00	4.75	15.63		3.75	21.00		21.21		29.25	11.00	4.50	.25	.25
5 **	† 250	1021442	-	600.0		8.50	12.00		6.50	5.00	20.00		3.88	24.50		22.68		35.00	13.00	4.50	.25	.25
6 **	† 300	1021460	-	775.0		8.38	12.00		6.75	6.00	19.50		4.75	25.00		25.06		35.25	13.00	5.00	.25	.25
7 **	† 400	1021478	-	1102.0		8.25	14.00		7.25	7.00	22.50		6.50	26.00		28.68		40.25	13.00	6.00	.25	.25