Công tắc áp suất - Series DX Wet/Wet

Series DX
Wet/Wet Differential Pressure Switch
NEMA 4X Enclosure, Low Differential Set Points

The Series DX is a differential pressure switch that makes a contact output based on the differential between two pressure sources. Wetted materials of brass and flouroelastomer are suitable for use with most gases and water based solutions. The switch can be used for low differential pressure indication with set point on a decrease of pressure as low as 1 psid (0.07 bar). Differential set point ranges are available from 2.5 to 75 psid (0.17 to 5.17 bar) on increasing differential pressure and 1.0 to 67 psid (0.07 to 4.62 bar) on decreasing differential pressure. Unit features a high static pressure rating of 200 psig (13.8 bar) for higher static pressure applications. Standard is a weatherproof, UL type 4X, enclosure for dust laden, outdoor, or wash-down installation environments. Series DX incorporates an externally adjustable set point, integral mounting flange and a removable electrical terminal block for quick and easy installation. The DX uses opposing diaphragms to sense the high and low pressure with a pivot mechanism that transfers the difference of the two pressures to the SPDT switch.

Applications:

Specifications:

• Service: Compatible gases and liquids.
• Wetted Materials: Connection: Brass; Diaphragm: Fluoroelastomer.
• Temperature Limits: 30 to 140°F (-1 to 60°C).
• Pressure Limits: 200 psig (13.8 bar).
• Enclosure Rating: Weatherproof UL type 4X (IP65).
• Repeatability: ±2% of full range.
• Switch Type: SPDT snap switch.
• Electrical Rating: 5A @ 125/250 VAC (~), 5A res. @ 30 VDC.
• Electrical Connection: Removable terminal block.
• Conduit Connection: 0.871" diameter hole for 1/2" conduit fitting.
• Process Connection: 1/4" NPT female. Continuous single side only pressure should not exceed 1.25 x full differential range.
• Mounting Orientation: Ports on horizontal plane, ±10°.
• Set Point Adjustment: External screw.
• Housing Materials: Body: Aluminum; Housing: Polycarbonate; Cover: 300 SS.
• Vibration and Shock: Set point repeats after 2.5 Gs, 5 to 500 Hz. Set point repeats after a 15 Gs, 10 millisecond duration.
• Altitude Limit: 6560 ft (2000 m).
• Humidity Limit: 80% (non-condensing).
• Pollution Degree: 2.
• Environment: Intended for indoor and outdoor use.
• Weight: 1 lb 3 oz (0.54 kg).
• Agency Approvals: CE, UL.

Văn Tuấn (Mr) - Sales Representative

Hotline : 091.328.1737

Tel : 08 – 35885256                    Fax : 08 - 39890210

Email : tuan@viphaco.vn           

Website : viphaco.vn       

Sản phẩm doanh nghiệp: CÔNG TY CỔ PHẦN KỸ THUẬT VIỆT PHÁT