Sản phẩm VIP cùng nhóm
- RÃNH MƯƠNG 300X300MM
- Máy quấn màng pallet tự động WP-55M mâm hở hổ trợ xe nâng tay
- Máy quấn màng pe pallet tự động WP-55P có tay giữ pallet
- MUA Tấm Sàn FRP 1220x2440x20mm
- Hệ thống bảo vệ End-of-Arm-Safeguard (SICK)
- Hệ thống khóa an toàn flexLock (SICK)
- Máy đóng đai thùng Chali JN-740 giá sỉ toàn quốc
- CHỐNG SÉT ĐƯỜNG TÍN HIỆU VSSC6 TRLDMOV 24VAC/DC – 1064810000
- BỘ MÃ HÓA GIA TĂNG DFS60E-BJCK02048 – 1073008
- 2828550000 – IE-SW-ELB-08-8TX – BỘ CHIA MẠNG 8 CỔNG RJ45 – WEIDMULLER
DANH MỤC SẢN PHẨM
SHOWA Automatic & Manual oil/grease lubrication pump
LIÊN HỆ MUA HÀNG
+6622232271Automatic & Manual SHOWA oil / grease lubrication pump from Japan with premium quality and reasonable price. Due to the high efficiency of ITS, Durability and best design, can work well with all types of machines in both Show Show Show Show Show Show Show Show Show Show Show Show Show Show Show Show Show SHOWA volumetric pump and wide resistance range of lubrication systems như packaging printing industries, machine tools, canning & bottling, printing, textile, plastics and other common and specific machines / applications in almost all industrial fields.
Lubrication system
Lubrication is essential to Maintain the performance, accuracy, and best operating condition of machinery.
Our Centralized lubrication system can feed lubricant to multiple points from a single source.
Oil lubrication system
System Outline
OIL LUBRICATION SYSTEMS
SHOWA oil lubrication systems comprises of two main sub-lubrication systems, offering different methods of distribution and discharge. Refer below to Identify the required lubrication system for lubricating Certain applications.
Volumetric SYSTEM
The volumetric type lubrication system focuses on measured volumes of oil Applying multiple lubrication points to the equipment or machinery on.
The distribution equipment (or Dester Dester Plunger Block) Measures amount of oil and then proceeds to forward a clear the lubricant to the lubrication points intermittently .
this accurate and intermittent distribution via the distribution equipment is induced by volumetric pump type.
Motorized pumps for this lubrication system, tremors and intermittent cycles through a controlling mechanism will halt use (Eg. IC Timers).
Distribution equipment for the volumetric type system can be separated Into two main categories.
Direct pump discharge pressure or spring pressure induced methods.
the first pump's discharge Utilizes the pressure to eject the oil from the pistons. the later method Utilizes the pump's pressure to replenish the pistons with oil and relies on the internal Displace spring to the oil.
As the displacement of pressure is required to carry equipment for the volumetric distribution type, all volumetric displacement type pumps possess Mechanisms pressure.
| Little. | code | description |
|---|---|---|
| first | - PUMP - | Volumetric Type |
| 2 | PD6 | nipple |
| 3 | PA6 | Bushing |
| 4 | PB6 | Sleeve |
| 5 | PKD6 | T Connector |
| 6 | DPB110 | Dester Plunger |
| 7 | PD612 | Main Pipe Nipple |
| 8 | PG12 | Sealing Plug / Gasket |
| 9 | DPB23 | Dester Plunger |
| name | JD2-6 | Junction |
| Little. | code | description |
|---|---|---|
| 11 | DSA2 | Dester Block |
| twelfth | FSC605 | Flexible Hose |
| 13 | DSB5 | Dester Block |
| 14 | DPB32 | Dester Plunger |
| 15 | coded coded coded coded coded coded coded coded coded coded PA4 | Bushing |
| 16 | PB4 | Sleeve |
| 17 | PD4 | nipple |
| 18 | PH4 | Elbow |
| 19 | PG004 | Sealing Plug |
RESISTANCE SYSTEM
By Applying various levels of resistance at the resistance type distribution junctions or lubrication points, oil from the pump unit can be Divided and discharged proportionally.
Through the selection of the pump unit and distribution equipment, oil can be discharged intermittently or at lubrication points or Continuously .
Unlike the volumetric system, specific volumes of oil to be discharged at lubrication points allowed, the resistance type system is not measure exact volumes past the pump unit for discharge.
Tuy nhiên, the resistance type enable continuous lubrication system, has an added Benefit of a cooling effect that, making this system is ideal where am am am am am am am am am also a requirement heat displacement along with general lubrication.
another factor is another, the volumetric capacity of the system to discharge oil from the pump pistons set the unit to Displace only halt internal and shouldnt require any more pressure can be discharged is before oil lubrication points at.
in comparison, Will be discharged from the oil lubrication system Continuously points in the resistance, as Long as the pump unit Continues to Operate.
as such, more emphasis is placed on the output capacity of the pump and control unit, in regards to discharge volumes at Certain lubrication points.
| Little. | code | description |
|---|---|---|
| first | - PUMP - | Resistance Type |
| 2 | coded coded coded coded coded coded coded coded coded PA4 | Bushing |
| 3 | PB4 | Sleeve |
| 4 | PD4 | nipple |
| 5 | LF01N | Line Filter |
| 6 | JHD3 | Head Junction |
| 7 | PTT | Proper Flow Unit |
| 8 | JD3 | Junction |
| 9 | FHC420 | Flexible Hose |
| Little. | code | description |
|---|---|---|
| name | DB6D | Dester Unit |
| 11 | PG004 | Sealing Plug |
| twelfth | PSS | Proper Flow Unit |
| 13 | PAN4 | Proper Nut (bushing) |
| 14 | PHD4 | Elbow |
| 15 | PST | Proper Flow Unit |
| 16 | PI1 | Elbow |
| 17 | DA8D | Dester Unit |
Grease lubrication system
GREASE LUBRICATION SYSTEMS
The system comprises of various sub-systems grease lubrication SHOWA, offering different methods of distribution and discharge. The 3 main sub-systems grease lubrication, lubrication allows a broad range of requirements to be catered for.
PROGRESSIVE SYSTEM
Pressurized grease is forwarded to the lubrication points in the sequence of the the individual by utilizing progressive type (volumetric) distribution blocks. As the pistons in the Dester G block (SG) move in sequence to distribute grease, the G block Will not function if Dester the single port is sealed. This characteristic of the system helps simplify monitoring and lubrication management. By confirming operation at the Dester G blocks, it is im im im im possible to Identify problems from a Centralized lubrication point. If a port (s) is not required, Attachments (PSG) can be used to combine ports. Additional blocks can be attached to the upper level Dester G (parent) blocks, broadening the lubrication system to meet varying requirements.
| Little. | code | description |
|---|---|---|
| first | MHG | Pump |
| 2 | SG608A | Distribution Block |
| 3 | SG606B | Block With Indicator |
| 4 | SG612A | Distribution Block |
| 5 | PSG104 | Attachment |
Pipe Fittings & Parts Section ★
| Pipe Size | Utilized fittings |
|---|---|
| φ8 | PD801, PA8, PB8 |
| φ6 | PD6, PA6, PB6 |
● Pipe Fittings & Parts Section
| Pipe Size | Utilized fittings |
|---|---|
| φ8 | PA6, PB6 |
| φ6 | PD604, coded coded coded PA4, PB4 |
SINGLE-LINE SYSTEM
Grease lubrication is forwarded to the distribution points simultaneously by triggering the individual volumetric equipment with intermittent pressure fluctuations and depressions. This action can be Performed by a displacement pump possessing a pressure mechanism. Differing with volumetric distribution blocks can be utilized and discharge volumes Incorporated Into a single lubrication system. This flexibility simplifies system layout and planning with discharge volumes, the single line system Enabling ideally suited for a wide variety to be of lubrication systems and Situations. Monitoring and management can be simplified by installing Performed general lubrication and pressure switches and distribution blocks with indicators at required locations.
| Little. | code | description |
|---|---|---|
| first | GPMW | Pump |
| 2 | 01050613 | Connector |
| 3 | 01050610 | Connector |
| 4 | PGL250 | Pressure Gauge |
| 5 | JHD3S | T - Connector |
| 6 | 01040600 | T - Connector |
| 7 | GDB6K | Junction Block |
| 8 | DG50 | piston Distributor |
| 9 | coded coded PA4 | Bushing |
| name | PB4 | Sleeve |
| Little. | code | description |
|---|---|---|
| 11 | PD4 | nipple |
| twelfth | PH4 | Elbow |
| 13 | DGE20 | Flow Sensor |
| 14 | GDB4K | Junction Block |
| 15 | PG1 | plug |
| 16 | DG3 | piston Distributor |
| 17 | GDB7K | Junction Block |
| 18 | DG30 | piston Distributor |
| 19 | PQ101 | Connector |
| 20 | GDB5K | Junction Block |
RESISTANCE SYSTEM
By Applying khác tiền of resistance at the resistance type distribution junctions or lubrication points, the grease from the pump can be Divided and discharged proportionally. Unlike the progressive or single-line systems, resistance systems are type specific không measure past the pump discharge volumes for smaller scale unit.Ideal for lubrication requirements (Under 10 lubrication points with distribution piping not exceeding 5 m in length). Lubrication systems can be installed and operated at minimal expense Due to the nature of the components and simple system. Fixed and adjustable resistance are available to simplify Applying installation distributors.
| It. | code | description |
|---|---|---|
| first | SHG | Pump |
| 2 | DB | Junction Block |
| 3 | CSS | Continuous Unit |
| 4 | PAN4 | Cracked |
| 5 | PB4 | Sleeve |
| 6 | PD110 | adapter |
| It. | code | description |
|---|---|---|
| 7 | PA6 | Bushing |
| 8 | PB6 | Sleeve |
| 9 | PD4 | nipple |
| ten | coded PA4 | Bushing |
| 11 | PH4 | Elbow | Sản phẩm doanh nghiệp: Namsae International Trading Co.,Ltd.
we are now the exclusive distributors for many kinds of products from several countries all over the world. We always monitor and consider the best quality for our customers. All of the products will be guaranteed under NITCO policy with reasonable price. 
![Sửa Máy Lạnh tại TPHCM [Trung Nam] Uy Tín – Chuyên Nghiệp – Tận Tâm](https://chodansinh.net/assets/upload/chodansinh/res/product/58690/sua-may-lanh-5zlwsKbinc.jpg)
